The fixture named "initial_data" is exceptional though; if it
doesn't exist, the error is not raised. This allows syncdb and
flush management commands to attempt to load it without causing
an error if it doesn't exist.
Thanks to Preston Timmons for the bulk of the work on the patch, especially
updating Django's own test suite to comply with the requirements of the new
runner. Thanks also to Jannis Leidel and Mahdi Yusuf for earlier work on the
patch and the discovery runner.
Refs #11077, #17032, and #18670.
This also updates all dependent functionality, including modelform_factory
and modelformset_factory, and the generic views `ModelFormMixin`,
`CreateView` and `UpdateView` which gain a new `fields` attribute.
Also, use Django templating for the dynamic generated JS code and use
more idiomatic coding techniques.
Thanks Matthew Tretter for the report and the patch.
I refactored RadioSelect and CheckboxSelectMultiple to
make them inherit from a base class, allowing them to share
the behavior of being able to iterate over their subwidgets.
Thanks to Matt McClanahan for the initial patch and to
Claude Paroz for the review.
Queries can contain binary data undecodable with utf-8. In this
case, using the 'replace' errors mode when decoding seems like
an acceptable representation of the query.
Thanks Marcel Ryser for the report.
This patch iproved two major parts in Django. First, the fields.related
was refactored. The main addition there was ForeignObject. Second, the
ORM now handles multicolumn joins in most cases, though there are still
cases that do not work correcly (split_exclude() for example).
In addition there were extesive changes to how GenericRelation works.
Before it was a fake m2m field, now it is a pure virtual fields and is
based on ForeignObject.
There is still much room for improvement. The related fields code is
still somewhat confusing, and how fields are represented in model._meta
should also be revisited.
This patch was written mostly by Jeremy Tillman with some final polish
by the committer.
Previously, depending on the database backend or the cursor type,
you'd need to double the percent signs in the query before passing
it to cursor.execute. Now cursor.execute consistently need percent
doubling whenever params argument is not None (placeholder substitution
will happen).
Thanks Thomas Güttler for the report and Walter Doekes for his work
on the patch.
This is provided as a new "validate_max" formset_factory option defaulting to
False, since the non-validating behavior of max_num is longstanding, and there
is certainly code relying on it. (In fact, even the Django admin relies on it
for the case where there are more existing inlines than the given max_num). It
may be that at some point we want to deprecate validate_max=False and
eventually remove the option, but this commit takes no steps in that direction.
This also fixes the DoS-prevention absolute_max enforcement so that it causes a
form validation error rather than an IndexError, and ensures that absolute_max
is always 1000 more than max_num, to prevent surprising changes in behavior
with max_num close to absolute_max.
Lastly, this commit fixes the previous inconsistency between a regular formset
and a model formset in the precedence of max_num and initial data. Previously
in a regular formset, if the provided initial data was longer than max_num, it
was truncated; in a model formset, all initial forms would be displayed
regardless of max_num. Now regular formsets are the same as model formsets; all
initial forms are displayed, even if more than max_num. (But if validate_max is
True, submitting these forms will result in a "too many forms" validation
error!) This combination of behaviors was chosen to keep the max_num validation
simple and consistent, and avoid silent data loss due to truncation of initial
data.
Thanks to Preston for discussion of the design choices.
The ticket dealt with a case where one query had .exclude() that
produced a subquery, the other query had a join to the same model that
was subqueried in the first query. This was already fixed in master, so
only test added.
This reverts commit 2cd0edaa47.
This commit was the cause of a memory leak. See ticket for more details.
Thanks Anssi Kääriäinen for identifying the source of the bug.
Before this change, the get_admin_log method would expect User model's
FK to be named `id`. When changing that FK name, admin/index.html
rendering would fail.
This includes:
* Changed the use of id for the use of pk property.
* Added a regression test that fails without the patch.
This commit refs #20088.
The original problem was that when filtering two levels up in
inheritance chain, Django optimized the join generation so that the
middle model was skipped. But then Django generated joins from top
to middle to bottom for SELECT clause, and thus there was one extra
join (top->middle->bottom + top -> bottom).
This case is fixed in master as the filtering optimization is gone.
This has the side effect that in some cases there is still extra join
if the SELECT clause doesn't contain anything from middle or bottom.
Model.save() will use UPDATE - if not updated - INSERT instead of
SELECT - if found UPDATE else INSERT. This should save a query when
updating, but will cost a little when inserting model with PK set.
Also fixed#17341 -- made sure .save() commits transactions only after
the whole model has been saved. This wasn't the case in model
inheritance situations.
The save_base implementation was refactored into multiple methods.
A typical chain for inherited save is:
save_base()
_save_parents(self)
for each parent:
_save_parents(parent)
_save_table(parent)
_save_table(self)
Thanks Anssi for haggling until I implemented this.
This change alleviates the need for atomic_if_autocommit. When
autocommit is disabled for a database, atomic will simply create and
release savepoints, and not commit anything. This honors the contract of
not doing any transaction management.
This change also makes the hack to allow using atomic within the legacy
transaction management redundant.
None of the above will work with SQLite, because of a flaw in the design
of the sqlite3 library. This is a known limitation that cannot be lifted
without unacceptable side effects eg. triggering arbitrary commits.
The sql/query.py add_q method did a lot of where/having tree hacking to
get complex queries to work correctly. The logic was refactored so that
it should be simpler to understand. The new logic should also produce
leaner WHERE conditions.
The changes cascade somewhat, as some other parts of Django (like
add_filter() and WhereNode) expect boolean trees in certain format or
they fail to work. So to fix the add_q() one must fix utils/tree.py,
some things in add_filter(), WhereNode and so on.
This commit also fixed add_filter to see negate clauses up the path.
A query like .exclude(Q(reversefk__in=a_list)) didn't work similarly to
.filter(~Q(reversefk__in=a_list)). The reason for this is that only
the immediate parent negate clauses were seen by add_filter, and thus a
tree like AND: (NOT AND: (AND: condition)) will not be handled
correctly, as there is one intermediary AND node in the tree. The
example tree is generated by .exclude(~Q(reversefk__in=a_list)).
Still, aggregation lost connectors in OR cases, and F() objects and
aggregates in same filter clause caused GROUP BY problems on some
databases.
Fixed#17600, fixed#13198, fixed#17025, fixed#17000, fixed#11293.
Before there was need to have both .relabel_aliases() and .clone() for
many structs. Now there is only relabeled_clone() for those structs
where alias is the only mutable attribute.
Replaced them with per-database options, for proper multi-db support.
Also toned down the recommendation to tie transactions to HTTP requests.
Thanks Jeremy for sharing his experience.
Since "unless managed" now means "if database-level autocommit",
committing or rolling back doesn't have any effect.
Restored transactional integrity in a few places that relied on
automatically-started transactions with a transitory API.
For users who didn't activate autocommit in their database options, this
is backwards-incompatible in "non-managed" aka "auto" transaction state.
This state now uses database-level autocommit instead of ORM-level
autocommit.
Also removed the uses_autocommit feature which lost its purpose.
Autocommit cannot be manipulated independently from an open connection.
This commit introduces a minor change in behavior: entering transaction
management forces opening a databasse connection. This shouldn't be
backwards incompatible in any practical use case.
enter_transaction_management() was nearly always followed by managed().
In three places it wasn't, but they will all be refactored eventually.
The "forced" keyword argument avoids introducing behavior changes until
then.
This is mostly backwards-compatible, except, of course, for managed
itself. There's a minor difference in _enter_transaction_management:
the top self.transaction_state now contains the new 'managed' state
rather than the previous one. Django doesn't access
self.transaction_state in _enter_transaction_management.
There were a couple of errors in ._dirty flag handling:
* It started as None, but was never reset to None.
* The _dirty flag was sometimes used to indicate if the connection
was inside transaction management, but this was not done
consistently. This also meant the flag had three separate values.
* The None value had a special meaning, causing for example inability
to commit() on new connection unless enter/leave tx management was
done.
* The _dirty was tracking "connection in transaction" state, but only
in managed transactions.
* Some tests never reset the transaction state of the used connection.
* And some additional less important changes.
This commit has some potential for regressions, but as the above list
shows, the current situation isn't perfect either.
Fixes#19584.
This implies stop storing file path command line arguments in envvars as
a security measure to start relying on with Popen's shell=False instead,
and addition of an 'utils' module.
Thanks kmichel_wgs for the report.
If Django was symlinked into site-packages the previous approach to discover
the tests subdirectory would fail. The revised version now always points to
the location of the source and not the import path.
The content of ifchanged template tag was rendered twice: first time, to
compare it with the previous value and the second time, to return the
rendered output.
Previously, the ifchanged node stored state on `self._last_seen`,
thereby giving undesired results when the node is reused by another
thread at the same time (e.g. globally caching a Template object).
Thanks to akaihola for the report and Diederik van der Boor and
Bas Peschier for the patch.
Changed the ip_address field for Comment to GenericIPAddressField. Added
instructions to the release notes on how to update the schema of existing
databases.
Change patch from https://code.djangoproject.com/ticket/5568
to work on modern Django.
Add special case for MySQL which has different syntax for DROP INDEX.
Add unit tests for the new functionality.
When iteration over a queryset raised an exception, the result cache
remained initialized with an empty list, so subsequent iterations returned
an empty list instead of raising an exception
Querying the reverse side of nullable to_field relation, where both
sides can contain null values resulted in incorrect results. The reason
was not detecting '' as NULL.
Refs #17541
There was a regression in case two models inherited the same parent,
and one contained a foreign key to other. When select_related travelled
the foreign key the other model reused the parent join made by the
first model. This was likely caused by Query.join_parent_model()
addition in commit 68985db482.
Thanks to Trac alias loic84 for report & tests.
The admin_widgets tests were issuing click() to the browser but
didn't wait for the effects of those clicks. This caused the resulting
request to be processed concurrently with the test case. When using
in-memory SQLite this caused weird failures.
Also added wait_page_loaded() to admin selenium tests for code
reuse.
Fixed#19856
The join promote=True was over-aggressive in select_related handling.
After that was removed, the only other user was query.combine(). That
use case is very easy to handle locally, so there is no more need for
the join(promote=True) flag.
Refs #19849.
This controls whether or not a database level cosntraint is created. This is useful in a few specialized circumstances, but in general should not be used!
The refactoring mainly concentrates on making sure the inner and outer
query agree about the split position. The split position is where the
multijoin happens, and thus the split position also determines the
columns used in the "WHERE col1 IN (SELECT col2 from ...)" condition.
This commit fixes a regression caused by #10790 and commit
69597e5bcc. The regression was caused
by wrong cols in the split position.
Django used to check the version of MySQL before handling the first
request, which required:
- opening a connection
- closing it, to avoid holding it idle until the first request.
This code isn't necessary any longer since Django dropped support for
some versions of MySQL, and other database backends don't implement a
similar dance. For consistency and maintenability, remove it.
Reverts 4423757c0c.
Closes#18135.
* Avoided calling BaseHttpResponse.close(). The test client take care of
that since acc5396e.
* Disconnected the request_finished signal when this method must be
called. The test client has a similar implementation since bacb097a.
Thanks Carl Meyer for the review.
Squashed commit of the following:
commit 4f290bdb60b7d8534abf4ca901bd0844612dcbda
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Wed Feb 13 21:21:30 2013 +0100
Used '0:00' instead of 'UTC' which doesn't always exist in Oracle.
Thanks Ian Kelly for the suggestion.
commit 01b6366f3ce67d57a58ca8f25e5be77911748638
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Wed Feb 13 13:38:43 2013 +0100
Made tzname a parameter of datetime_extract/trunc_sql.
This is required to work around a bug in Oracle.
commit 924a144ef8a80ba4daeeafbe9efaa826566e9d02
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Wed Feb 13 14:47:44 2013 +0100
Added support for parameters in SELECT clauses.
commit b4351d2890cd1090d3ff2d203fe148937324c935
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Mon Feb 11 22:30:22 2013 +0100
Documented backwards incompatibilities in the two previous commits.
commit 91ef84713c81bd455f559dacf790e586d08cacb9
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Mon Feb 11 09:42:31 2013 +0100
Used QuerySet.datetimes for the admin's date_hierarchy.
commit 0d0de288a5210fa106cd4350961eb2006535cc5c
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Mon Feb 11 09:29:38 2013 +0100
Used QuerySet.datetimes in date-based generic views.
commit 9c0859ff7c0b00734afe7fc15609d43d83215072
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:43:25 2013 +0100
Implemented QuerySet.datetimes on Oracle.
commit 68ab511a4ffbd2b811bf5da174d47e4dd90f28fc
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:43:14 2013 +0100
Implemented QuerySet.datetimes on MySQL.
commit 22d52681d347a8cdf568dc31ed032cbc61d049ef
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:42:29 2013 +0100
Implemented QuerySet.datetimes on SQLite.
commit f6800fd04c93722b45f9236976389e0b2fe436f5
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:43:03 2013 +0100
Implemented QuerySet.datetimes on PostgreSQL.
commit 0c829c23f4cf4d6804cadcc93032dd4c26b8c65e
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:41:08 2013 +0100
Added datetime-handling infrastructure in the ORM layers.
commit 104d82a7778cf3f0f5d03dfa53709c26df45daad
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Mon Feb 11 10:05:55 2013 +0100
Updated null_queries tests to avoid clashing with the __second lookup.
commit c01bbb32358201b3ac8cb4291ef87b7612a2b8e6
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 23:07:41 2013 +0100
Updated tests of .dates().
Replaced .dates() by .datetimes() for DateTimeFields.
Replaced dates with datetimes in the expected output for DateFields.
commit 50fb7a52462fecf0127b38e7f3df322aeb287c43
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:40:09 2013 +0100
Updated and added tests for QuerySet.datetimes.
commit a8451a5004c437190e264667b1e6fb8acc3c1eeb
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 22:34:46 2013 +0100
Documented the new time lookups and updated the date lookups.
commit 29413eab2bd1d5e004598900c0dadc0521bbf4d3
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 16:15:49 2013 +0100
Documented QuerySet.datetimes and updated QuerySet.dates.
For languages with non-breaking space as thousand separator,
standard space input should also be allowed, as few people know
how to enter non-breaking space on keyboards. Refs #17217.
Thanks Alexey Boriskin for the report and initial patch.
Wrap the Parser.compile_filter method call with a try/except and call the
newly added Parser.compile_filter_error(). Overwrite this method in the
DebugParser to throw the correct error.
Since this error was otherwise catched by the compile_function try/except
block the debugger highlighted the wrong line.
The reason was that the except clause needed to remove a connection
from the django.db.connections dict, but other parts of Django do not
expect this to happen. In addition the except clause was silently
swallowing the exception messages.
Refs #19707, special thanks to Carl Meyer for pointing out that this
approach should be taken.
When a query had a complex where condition (a condition targeting more
than the base table) a subquery was used for deletion. However, the
query had default ordering from the model's meta and Oracle doesn't
work with ordered subqueries.
The regression was caused by fast-path deletion code introduced in
1cd6e04cd4 for fixing #18676.
Thanks to Dylan Klomparens for the report.
Also, according to the comments on the ticket and its duplicates, added
tests execising saving an instance of a model with a GFK to:
* An unsaved object -- This actually doesn't generate the same failure
but another ORM-level exception. The test verifies it's the case.
* An instance of a model with a __nonzero__() method thant returns False
for it. This doesn't fail because that code path isn't executed.
* An instance of a model with a CharField PK and an empty value for it.
This doesn't fail.
They are handled independently now and the latter can be influenced by
the new BaseCommand.leave_locale_alone internal option.
Thanks chrischambers for the report, Claude, lpiatek, neaf and gabooo for
their work on a patch, originally on refs. #17379.
They are simply ignored now. This allows for a more correct behavior when
they are placed before translatable constructs on the same line.
Previously, the latter were wrongly ignored because the former were
preserved when converting template code to the internal Python-syntax
form later fed to xgettext but Python has no ``/* ... */``-style
comments.
Also, special comments directed to translators are now only taken in
account when they are located at the end of a line. e.g.::
{# Translators: ignored #}{% trans "Literal A" %}{# Translators: valid, associated with "Literal B" below #}
{% trans "Literal B" %}
Behavior of ``{% comment %}...{% endcomment %}``tags remains unchanged.
Thanks juneih at redpill-linpro dot com for the report and Claude for
his work on the issue.
The main cleanup was removal of non-necessary __unicode__ method. The
tests didn't break on py3 as the string representation was never used
in the tests.
Refs #17813. Thanks to Simon Charette for spotting this issue.
Thanks a lot to everybody participating in developing this feature.
The patch was developed by multiple people, at least Trac aliases
tonnzor, jimmysong, Fandekasp and slurms.
Stylistic changes added by committer.
It creates a `locale/django.pot` file once instead of one
`locale/<locale_code>/django.pot` file for every locale involved.
Thanks Michal Čihař for the report and patch.
In a normal relational construct, if you're listening for an event
that signals a child was deleted, you dont expect that the parent
was deleted already.
This change ensures that post_delete signals are fired immediately
after objects are deleted in the graph.
The original problem was that queryset cloning was really expensive
when filtering with F() clauses. The __deepcopy__ went too deep copying
_meta attributes of the models used. To fix this the use of
__deepcopy__ in qs cloning was removed.
This commit results in some speed improvements across the djangobench
benchmark suite. Most query_* tests are 20-30% faster, save() is 50%
faster and finally complex filtering situations can see 2x to order
of magnitude improvments.
Thanks to Suor, Alex and lrekucki for valuable feedback.
The tickets are either about different signature between qs.none() and
qs or problems with subclass types (either EmptyQS overrided the custom
qs class, or EmptyQS was overridden by another class - values() did
this).
Fixed#15959, fixed#17271, fixed#17712, fixed#19426
The guarantee that no queries will be made when accessing results is
done by new EmptyWhere class which is used for query.where and having.
Thanks to Simon Charette for reviewing and valuable suggestions.
When &'ing or |'ing querysets, wrong values could be cached, and crashes
could happen.
Thanks Marc Tamlyn for figuring out the problem and writing the patch.
* Used override_settings consistently -- changes to DEBUG could leak.
* Took advantage of assertRaisesRegexp.
* Fixed indentation -- some code was indented at 2 spaces.
An index on TextField results in a warning message when running tests
on MySQL or SQLite, and the test using the TextField was PostgreSQL
only in any case.
The added promotion logic is based on promoting any joins used in only
some of the childs of an OR clause unless the join existed before the
OR clause addition.
The ORM didn't reuse joins for direct foreign key traversals when using
chained filters. For example:
qs.filter(fk__somefield=1).filter(fk__somefield=2))
produced two joins.
As a bonus, reverse onetoone filters can now reuse joins correctly
The regression was caused by the join() method refactor in commit
68847135bc
Thanks for Simon Charette for spotting some issues with the first draft
of the patch.
This is necessary because get_model() checks are case insensitive, and if the swapable check isn't, the
swappable logic gets tied up in knots with models that are partially swapped out.
Thanks to chris@cogdon.org for the report and extensive analysis, and Preston for his work on the draft patch.
This is a rather large refactoring. The "lookup traversal" code was
splitted out from the setup_joins. There is now names_to_path() method
which does the lookup traveling, the actual work of setup_joins() is
calling names_to_path() and then adding the joins found into the query.
As a side effect it was possible to remove the "process_extra"
functionality used by genric relations. This never worked for left
joins. Now the extra restriction is appended directly to the join
condition instead of the where clause.
To generate the extra condition we need to have the join field
available in the compiler. This has the side-effect that we need more
ugly code in Query.__getstate__ and __setstate__ as Field objects
aren't pickleable.
The join trimming code got a big change - now we trim all direct joins
and never trim reverse joins. This also fixes the problem in #10790
which was join trimming in null filter cases.
F() expressions reuse joins like any lookup in a .filter() call -
reuse multijoins generated in the same .filter() call else generate
new joins. Also, lookups can now reuse joins generated by F().
This change is backwards incompatible, but it is required to prevent
dict randomization from generating different queries depending on
.filter() kwarg ordering. The new way is also more consistent in how
joins are reused.
This allows for Paginator subclasses to easily override the Page class
that gets used.
Took the opportunity to also do some non-invasive PEP8 tidying of the
paginator module.
Capture warnings in Python >= 2.7 and route through
console handler, which is subject to DEBUG==True
Thanks to dstufft for the idea, and claudep for initial patch
The select_related code got confused when it needed to travel a
reverse relation to a model which had different parent than the
originally travelled relation.
Thanks to Trac aliases shauncutts for report and ungenio for original
patch (committed patch is somewhat modified version of that).
Browsers consider the first newline in textareas as some display
artifact, not real content. Hence they are not sending it back to
the server. If we want to keep initial newlines, we have to add one
when we render the textarea.
Thanks bastih for the report and initial patch.
A test in Model Forms test was specifically referring to a fixed
primary key, which was now being used up in a newly committed.
This has been worked around by specifying a higher primary
key.
When calling model_to_dict, improve performance of the generated SQL by
using values_list to determine primary keys of many to many objects. Add
a specific test for this function, test_model_to_dict_many_to_many
Thanks to brian for the original report and suggested fix.
Ensured that special characters passed in to reverse via the
prefix argument are properly escaped so that calls to
django.utils.regex_helpers.normalize and/or string formatting
operations don't result in exceptions.
Thanks to toofishes for the error report.
The dupe avoidance logic was removed as it doesn't seem to do anything,
it is complicated, and it has nearly zero documentation.
The removal of dupe_avoidance allowed for refactoring of both the
implementation and signature of Query.join(). This refactoring cascades
again to some other parts. The most significant of them is the changes
in qs.combine(), and compiler.select_related_descent().
There was a potential data-loss issue involved -- when clearing
instance's m2m assignments it was possible some other instance's
m2m data was deleted instead.
This commit also improved None handling for to_field cases.
Since http://bugs.python.org/issue2193 has been resolved in favour of
the colon in cookie names, we need to test invalid cookie removal using
a different character. "@" is still considered invalid by all sources.
There was a bug introduced in #18676 which caused fast-path deletes
implemented as "DELETE WHERE pk IN <subquery>" to fail if the SELECT
clause contained additional stuff (for example extra() and annotate()).
Thanks to Trac alias pressureman for spotting this regression.
We probably historically customized it for good reasons, but
currently, the differences with upstream Python are not
significant any longer.
Also fixes#19075 for which a test has been added.
Done for consistency with Q() expressions and QuerySet combining. This
will allow usage of '&' and '|' as boolean logical operators in the
future. Refs #16211.
Refs #17867.
The address in test_email_regexp_for_performance used to take forever
(security issue), then was supposed to fail after the fix (commit 9f8287a3f).
Now we are less strict with domain validation, due to new IDN domains,
hence the validation of this address pass now.
This is especially needed to compare XML when hash randomization
is on, as attribute order may vary. Refs #17758, #19038.
Thanks Taylor Mitchell for the initial patch, and Ian Clelland for
review and cleanup.
Objects can be fast-path deleted if there are no signals, and there are
no further cascades. If fast-path is taken, the objects do not need to
be loaded into memory before deletion.
Thanks to Jeremy Dunck, Simon Charette and Alex Gaynor for reviewing
the patch.
Thanks to the many people that contributed to the development and review of
this patch, including (but not limited to) Jacob Kaplan-Moss, Anssi
Kääriäinen, Ramiro Morales, Preston Holmes, Josh Ourisman, Thomas Sutton,
and Roger Barnes, as well as the many, many people who have contributed to
the design discussion around this ticket over many years.
Squashed commit of the following:
commit d84749a0f034a0a6906d20df047086b1219040d0
Merge: 531e771 7c11b1a
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Wed Sep 26 18:37:04 2012 +0800
Merge remote-tracking branch 'django/master' into t3011
commit 531e7715da545f930c49919a19e954d41c59b446
Merge: 29d1abb 1f84b04
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Wed Sep 26 07:09:23 2012 +0800
Merged recent trunk changes.
commit 29d1abbe351fd5da855fe5ce09e24227d90ddc91
Merge: 8a527dd 54c81a1
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Mon Sep 24 07:49:46 2012 +0800
Merge remote-tracking branch 'django/master' into t3011
commit 8a527dda13c9bec955b1f7e8db5822d1d9b32a01
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Mon Sep 24 07:48:05 2012 +0800
Ensure sequences are reset correctly in the presence of swapped models.
commit e2b6e22f298eb986d74d28b8d9906f37f5ff8eb8
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 23 17:53:05 2012 +0800
Modifications to the handling and docs for auth forms.
commit 98aba856b534620aea9091f824b442b47d2fdb3c
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 23 15:28:57 2012 +0800
Improved error handling and docs for get_user_model()
commit 0229209c844f06dfeb33b0b8eeec000c127695b6
Merge: 6494bf9 8599f64
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 23 14:50:11 2012 +0800
Merged recent Django trunk changes.
commit 6494bf91f2ddaaabec3ec017f2e3131937c35517
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Mon Sep 17 21:38:44 2012 +0800
Improved validation of swappable model settings.
commit 5a04cde342cc860384eb844cfda5af55204564ad
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Mon Sep 17 07:15:14 2012 +0800
Removed some unused imports.
commit ffd535e4136dc54f084b6ac467e81444696e1c8a
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 16 20:31:28 2012 +0800
Corrected attribute access on for get_by_natural_key
commit 913e1ac84c3d9c7c58a9b3bdbbb15ebccd8a8c0a
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 16 20:12:34 2012 +0800
Added test for proxy model safeguards on swappable models.
commit 280bf19e94d0d534d0e51bae485c1842558f4ff4
Merge: dbb3900 935a863
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 16 18:16:49 2012 +0800
Merge remote-tracking branch 'django/master' into t3011
commit dbb3900775a99df8b6cb1d7063cf364eab55621a
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 16 18:09:27 2012 +0800
Fixes for Python 3 compatibility.
commit dfd72131d8664615e245aa0f95b82604ba6b3821
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 16 15:54:30 2012 +0800
Added protection against proxying swapped models.
commit abcb027190e53613e7f1734e77ee185b2587de31
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 16 15:11:10 2012 +0800
Cleanup and documentation of AbstractUser base class.
commit a9491a87763e307f0eb0dc246f54ac865a6ffb34
Merge: fd8bb4e 08bcb4a
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 16 14:46:49 2012 +0800
Merge commit '08bcb4aec1ed154cefc631b8510ee13e9af0c19d' into t3011
commit fd8bb4e3e498a92d7a8b340f0684d5f088aa4c92
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 16 14:20:14 2012 +0800
Documentation improvements coming from community review.
commit b550a6d06d016ab6a0198c4cb2dffe9cceabe8a5
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 16 13:52:47 2012 +0800
Refactored skipIfCustomUser into the contrib.auth tests.
commit 52a02f11107c3f0d711742b8ca65b75175b79d6a
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 16 13:46:10 2012 +0800
Refactored common 'get' pattern into manager method.
commit b441a6bbc7d6065175715cb09316b9f13268171b
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 16 13:41:33 2012 +0800
Added note about backwards incompatible change to admin login messages.
commit 08bcb4aec1ed154cefc631b8510ee13e9af0c19d
Author: Anssi Kääriäinen <akaariai@gmail.com>
Date: Sat Sep 15 18:30:33 2012 +0300
Splitted User to AbstractUser and User
commit d9f5e5addbad5e1a01f67e7358e4f5091c3cad81
Author: Anssi Kääriäinen <akaariai@gmail.com>
Date: Sat Sep 15 18:30:02 2012 +0300
Reworked REQUIRED_FIELDS + create_user() interaction
commit 579f152e4a6e06671e1ac1e59e2b43cf4d764bf4
Merge: 9184972 93e6733
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sat Sep 15 20:18:37 2012 +0800
Merge remote-tracking branch 'django/master' into t3011
commit 918497218c58227f5032873ff97261627b2ceab2
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sat Sep 15 20:18:19 2012 +0800
Deprecate AUTH_PROFILE_MODULE and get_profile().
commit 334cdfc1bb6a6794791497cdefda843bca2ea57a
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sat Sep 15 20:00:12 2012 +0800
Added release notes for new swappable User feature.
commit 5d7bb22e8d913b51aba1c3360e7af8b01b6c0ab6
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sat Sep 15 19:59:49 2012 +0800
Ensure swapped models can't be queried.
commit 57ac6e3d32605a67581e875b37ec5b2284711a32
Merge: f2ec915 abfba3b
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sat Sep 15 14:31:54 2012 +0800
Merge remote-tracking branch 'django/master' into t3011
commit f2ec915b20f81c8afeaa3df25f80689712f720f8
Merge: 1952656 5e99a3d
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 9 08:29:51 2012 +0800
Merge remote-tracking branch 'django/master' into t3011
commit 19526563b54fa300785c49cfb625c0c6158ced67
Merge: 2c5e833 c4aa26a
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 9 08:22:26 2012 +0800
Merge recent changes from master.
commit 2c5e833a30bef4305d55eacc0703533152f5c427
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 9 07:53:46 2012 +0800
Corrected admin_views tests following removal of the email fallback on admin logins.
commit 20d1892491839d6ef21f37db4ca136935c2076bf
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sun Sep 9 01:00:37 2012 +0800
Added conditional skips for all tests dependent on the default User model
commit 40ea8b888284775481fc1eaadeff267dbd7e3dfa
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sat Sep 8 23:47:02 2012 +0800
Added documentation for REQUIRED_FIELDS in custom auth.
commit e6aaf659708cf6491f5485d3edfa616cb9214cc0
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Sat Sep 8 23:20:02 2012 +0800
Added first draft of custom User docs.
Thanks to Greg Turner for the initial text.
commit 75118bd242eec87649da2859e8c50a199a8a1dca
Author: Thomas Sutton <me@thomas-sutton.id.au>
Date: Mon Aug 20 11:17:26 2012 +0800
Admin app should not allow username discovery
The admin app login form should not allow users to discover the username
associated with an email address.
commit d088b3af58dad7449fc58493193a327725c57c22
Author: Thomas Sutton <me@thomas-sutton.id.au>
Date: Mon Aug 20 10:32:13 2012 +0800
Admin app login form should use swapped user model
commit 7e82e83d67ee0871a72e1a3a723afdd214fcefc3
Merge: e29c010 39aa890
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Fri Sep 7 23:45:03 2012 +0800
Merged master changes.
commit e29c010beb96ca07697c4e3e0c0d5d3ffdc4c0a3
Merge: 8e3fd70 30bdf22
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Mon Aug 20 13:12:57 2012 +0800
Merge remote-tracking branch 'django/master' into t3011
commit 8e3fd703d02c31a4c3ac9f51f5011d03c0bd47f6
Merge: 507bb50 26e0ba0
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Mon Aug 20 13:09:09 2012 +0800
Merged recent changes from trunk.
commit 507bb50a9291bfcdcfa1198f9fea21d4e3b1e762
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Mon Jun 4 20:41:37 2012 +0800
Modified auth app so that login with alternate auth app is possible.
commit dabe3628362ab7a4a6c9686dd874803baa997eaa
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Mon Jun 4 20:10:51 2012 +0800
Modified auth management commands to handle custom user definitions.
commit 7cc0baf89d490c92ef3f1dc909b8090191a1294b
Author: Russell Keith-Magee <russell@keith-magee.com>
Date: Mon Jun 4 14:17:28 2012 +0800
Added model Meta option for swappable models, and made auth.User a swappable model
Thanks kmike for the report and initial patch for the changelist->edit
object view link URL.
Other affected links include the delete object one and object history
one (in this case the change had been implemented in commit 5a9e127, this
commit adds admin-quoting of the object PK in a way similar to a222d6e.)
Refs #15294.
Thanks to Jeremy Dunck for pointing out the problem with this change. If in a
single transaction, the master deletes a record and then get_or_creates a
similar record, under the new behavior the get_or_create would find the record
in the slave db and fail to re-create it, leaving the record nonexistent, which
violates the contract of get_or_create that the record should always exist
afterwards. We need to do everything against the master here in order to ensure
correctness.
This reverts commit 901af86550.
When doing deeper than one level select_related() + only queries(), the
code introduced in b6c356b7bb errored
incorrectly.
Thanks to mrmachine for report & test case.
During the new-admin changes, catching of AttributeError was added to
the admin. This patch removes that as it's no longer possible to add a
value to a ModelAdmin that is not available. Adding an attribute that
can not be called causes an ImproperlyConfigured exception to be raised.
Even after repeated adjustment of the constants, this test still fails
randomly. It has educated us to ignore messages from Jenkins, to a
point where we missed some actual failures. In addition, it accounts
for a non-negligible percentage of the run time of the test suite
just by itself. Since no one has proposed a convincing patch in months,
I'm going to remove the patch. We can't keep a randomly failing test
forever.
Unlike other model fields, the newly introduced (1.4)
GenericIPAddressField did not accept verbose_name and name as the
first positional arguments. This commit fixes it.
Thanks Dan McGee for the report and the patch.
The joins for nested nullable foreign keys were often created as INNER
when they should have been OUTER joins. The reason was that only the
first join in the chain was promoted correctly. There were also issues
with select_related etc.
The basic structure for this problem was:
A -[nullable]-> B -[nonnull]-> C
And the basic problem was that the A->B join was correctly LOUTER,
the B->C join not.
The major change taken in this patch is that now if we promote a join
A->B, we will automatically promote joins B->X for all X in the query.
Also, we now make sure there aren't ever join chains like:
a LOUTER b INNER c
If the a -> b needs to be LOUTER, then the INNER at the end of the
chain will cancel the LOUTER join and we have a broken query.
Sebastian reported this problem and did also major portions of the
patch.
The ORM generated a query with INNER JOIN instead of LEFT OUTER JOIN
in a somewhat complicated case. The main issue was that there was a
chain of nullable FK -> non-nullble FK, and the join promotion logic
didn't see the need to promote the non-nullable FK even if the
previous nullable FK was already promoted to LOUTER JOIN. This resulted
in a query like a LOUTER b INNER c, which incorrectly prunes results.
Made two-digit hours and minutes mandatory in tzinfo (the code used
to crash if a one-digit representation was provided).
Added standalone tests for django.utils.dateparse.
Remove the params variable from the context and just put the variables
in directly.
This had not been committed previously as the original pattern was used
in the functional generic views and we wanted consistency between them,
but django.views.generic.simple.direct_to_template is now gone so we can
do it 'right'.
Patch by @jphalip updated to apply, documentation and release notes
added.
I've documented strip_tags as well as remove_tags as the difference
between the two wouldn't be immediately obvious.
We should catch all exceptions in the thread to ensure it doesn't die
with an unhandled exception. The type of the exception is already
checked further in the test.
An ordering test had two problems related to dict.items() usage:
- It assumed the order of the dict was non-randomized
- It indexed to the dict.items() which is py3 incompatible.
I fixed the test by using dict['rank'] directly, where rank is the
column tested on the values queryset.
Deferred models now automatically update only the fields which are
loaded from the db (with .only() or .defer()). In addition, any field
set manually after the load is updated on save.
This patch removes an unconditional float(value) conversion from db
backend default convert_values() method. This can cause problems when
aggregating over character fields for example. In addition, Oracle
and SQLite already return the bare value from their convert_values().
In the long term the converting should be done by fields, and the
fields should then call database backend specific converters when
needed. The current setup is inflexible for 3rd party fields.
Thanks to Merlijn van Deen for the original patch.
* Renamed the __unicode__ methods
* Applied the python_2_unicode_compatible decorator
* Removed the StrAndUnicode mix-in that is superseded by
python_2_unicode_compatible
* Kept the __unicode__ methods in classes that specifically
test it under Python 2
* Renamed smart_unicode to smart_text (but kept the old name under
Python 2 for backwards compatibility).
* Renamed smart_str to smart_bytes.
* Re-introduced smart_str as an alias for smart_text under Python 3
and smart_bytes under Python 2 (which is backwards compatible).
Thus smart_str always returns a str objects.
* Used the new smart_str in a few places where both Python 2 and 3
want a str.
cleaned_data is no longer deleted when form validation fails but only
contains the data that did validate.
Thanks to the various contributors to this patch (see ticket).
The keys/items/values methods return iterators in Python 3, and the
iterkeys/items/values methods don't exist in Python 3. The behavior
under Python 2 is unchanged.
Previously, the flush was done before the test case execution and now
it is performed after it.
Other changes to the testing infrastructure include:
* TransactionTestCase now doesn't reset autoincrement sequences either
(previous behavior can achieved by using `reset_sequences`.)
With this, no implicit such reset is performed by any of the provided
TestCase classes.
* New ordering of test cases: All unittest tes cases are run first and
doctests are run at the end.
THse changes could be backward-incompatible with test cases that relied
on some kind of state being preserved between tests. Please read the
relevant sections of the release notes and testing documentation for
further details.
Thanks Andreas Pelme for the initial patch. Karen Tracey and Anssi
Kääriäinen for the feedback and Anssi for reviewing.
This also fixes#12408.
In particular, allow the '--' sequence to be present in string
values without being interpreted as comment marker.
Thanks Tim Chase for the report and shaleh for the initial patch.
Also removed the hasattr check when firing request_finished signal for
caches with a 'close' method. Should be safe to call `cache.close`
everywhere now
The qs.bulk_create() method did not work with large batches together
with SQLite3. This commit adds a way to split the bulk into smaller
batches. The default batch size is unlimited except for SQLite3 where
the batch size is limited to 999 SQL parameters per batch.
Thanks to everybody who participated in the discussions at Trac.
Cleared aggregations on add_date_select method so only distinct dates
are returned when dealing with a QuerySet that contained aggregations.
That would cause the query set to return repeated dates because it
would look for distinct (date kind, aggregation) pairs.
