jqLite previously used `elt.className` to add and remove classes from a DOM Node, but
because the className property is not writable on SVG elements, it doesn't work with
them. This patch replaces accesses to `className` with `get/setAttribute`.
`classList` was also considered as a solution, but because only IE10+ supports it, we
have to wait. :'(
The JqLiteAddClass/JQLiteRemoveClass methods are now also used directly by $animate
to work around the jQuery not being able to handle class modifications on SVG elements.
Closes#3858
The problem was in keeping the values of `attrNameStart` and `attrNameEnd` between directive loop iterations which lead to the compiler looking for multi-element ranges for any directives that happened to be in the directive list after one that was applied on a range. For instance, having a ng-repeat-start and ng-class on a single element with ng-repeat being resolved first made the compiler look for an ng-repeat-end for both ng-repeat and ng-class because the `attrNameEnd` was not reset to a falsy value before the second iteration. As the result, an exception saying the block end element could not be found and the second directive was not actually applied.
Closes#4002
Previously if the collection model was set to undefined on the first digest,
the repeater would get confused and not use the correct tracking function
for associating model with dom elements in the repeater.
Closes#4145Closes#3964
Ref: https://github.com/angular/angular.js/pull/4045
I have this sinking feeling that support this use case sort of
encourages binding to function that blindly trust some html. For now,
I'm fixing the issue while I think about the use cases some more.
In the case of a function that performs any non-trivial work before
wrapping the value (e.g. the showdown filter in issue #3980, or the
binding to a simply wrapper function in issue #3932 if it did anything
meaty), this fix makes it "work" - but performance is going to suck -
you should bind to some other thing on scope that watches the actual
source and adjusts itself when that changes (e.g. the showdown filter.)
For the case of the wrapper in #3932, if one isn't performing
sanitization or some such thing - then you the developer has insight
into why that value is safe in that particular context - and it should
be available simply by name and not as a result of a function taking any
arbitrary input to make auditing of security a little saner.
Closes#3932, #3980
BREAKING CHANGE: ngInclude's priority is now set to 1000
It's quite rare for anyone to depend on explicity directive priority,
but if a custom directive that needs to run before ngInclude exists,
it should have its priority checked and adjusted if needed.
Closes#3793
Previously, the check that Application should return a new $window and
$document had the arguments reversed in the first call to navigateTo;
thus, the subsequent check of inequality of $window and $document in the
next navigateTo call would always pass.
This corrects the argument order, which makes this test not succeptible
to false positives.
onAnimationProgress now checks the event's elapsedTime property before
checking the originalEvent.elapsedTime property.
Use browserTrigger with elapsedTime parameter to trigger animation events
BREAKING CHANGE: browserTrigger now uses an eventData object instead of direct parameters for mouse events.
To migrate, place the `keys`,`x` and `y` parameters inside of an object and place that as the third parameter
for the browserTrigger function.
It's great that IE11 wants to be compatible enough that it doesn't want
to be special cased and treated differently.
However, as long as one has to have a different code path for IE than
for the other supported browsers, we still need to detect and special
case it. For instance, our URL parsing code still needs the same
workaround the we used for IE10. We still see the same Access denied /
TypeError exceptions when setting certain values. FYI, Angular doesn't
generally blindly test for IE – we also check the version number.
Thanks to modern.ie for the free IE11 test VM.
Closes#3682
This reverts commit 42af8eada2.
This turned out to be a bad idea as it prevents us from moving the
time forward and asserting that the component state didn't change
due to the scheduled task executing too early.
This change causes a new $digest to be scheduled in the next tick if
a task was was sent to the $evalAsync queue from outside of a $digest
or an $apply.
While this mode of operation is not common for most of the user code,
this change means that $q promises that utilze $evalAsync queue to
guarantee asynchronicity of promise apis will now also resolve outside
of a $digest, which turned out to be a big pain point for some developers.
The implementation ensures that we don't do more work than needed and
that we coalese as much work as possible into a single $digest.
The use of $browser instead of setTimeout ensures that we can mock out
and control the scheduling of "auto-flush", which should in theory
allow all of the existing code and tests to work without negative
side-effects.
Closes#3539Closes#2438
When $timeout#flush is called with a delay and no task can be flushed within that
delay, the current time should not be updated as that gets the mock into an inconsistent
state.
BREAKING CHANGE: if a tests was written around the buggy behavior the delays might be off now
This would typically not be a problem, but because of the previous breaking change in
$timeout.flush, the combination of two might be confusing and that's why we are documenting
it.
Old behavior:
```
doSomething(); //schedules task to execute in 500ms from now
doOtherStuff(); //schedules task to execute in 600ms from now
try {
$timeout.flush(300); // throws "no task to be flushed" exception
} catch(e) {};
$time.flush(200); //flushes only doSomething() task
```
New behavior:
```
doSomething(); //schedules task to execute in 500ms from now
doOtherStuff(); //schedules task to execute in 600ms from now
try {
$timeout.flush(300); // throws "no task to be flushed" exception
} catch(e) {};
$time.flush(200); // throws "no task to be flushed" exception again
// because previous exception didn't move the time forward
```
Fixed test:
```
doSomething(); //schedules task to execute in 500ms from now
doOtherStuff(); //schedules task to execute in 600ms from now
try {
$timeout.flush(300); // throws "no task to be flushed" exception
} catch(e) {};
$time.flush(500); // flushes only doSomething() task
```
When calling $timeout.flush with or without a delay an exception should
be thrown if there is nothing to be flushed.
This prevents tests from flushing stuff unnecessarily.
BREAKING CHANGE: calling $timeout.flush(delay) when there is no task to be flushed
within the delay throws an exception now.
Please adjust the delay or remove the flush call from your tests as the exception
is a signed of a programming error.
ngAnimate causes a 1ms flicker on the screen when no CSS animations are present on the element.
The solution is to change $animate to only use $timeouts when a duration is found on the element
before the transition/keyframe animation takes over.
Closes#3613
This reverts commit 637c9b1611.
(ref #3633 and #3646)
The minimum bar for $sce is IE8 in standards mode. IE7 standards mode
is not supported. If you must support IE7, you should disable $sce
completely.
angular.module('ie7support', []).config(function($sceProvider) {
// Completely disable SCE to support IE7.
$sceProvider.enabled(false);
});
Changes documentMode test version to 7 in order to support IE 8 in IE 7 standards
mode while still protecting against quirks mode.
documentMode returns the following values:
5 - quirks mode,
7 - IE 7 standards mode,
8 - IE 8 standards mode.
Closes#3633Closes#3646
when the transluded content is being teleported to the translusion point, we should ensure that
the translusion point is empty before appending otherwise we end up with junk before the transcluded
content
previously the translusion was appended the the ngTranslude element via
$evalAsync which makes the transluded dom unavailable to parent
post-linking functions. By appending translusion in linking phase,
post-linking functions will be able to access it.
Code was evaluating !expression[key] while attempting to
see if the key was present, but this was evaluating to true for
false values as well as missing keys.
Closes#2797.
Make sure $timeout callbacks are forgotten about immediately after
execution or cancellation.
Previously when passing invokeApply=false, the cleanup used $q and so
would be pending until the next $digest was triggered. This does not
make a large functional difference, but can be very visible when
looking at memory consumption of an app or debugging around the
$$asyncQueue - these callbacks can have a big retaining tree.
