This change causes a new $digest to be scheduled in the next tick if
a task was was sent to the $evalAsync queue from outside of a $digest
or an $apply.
While this mode of operation is not common for most of the user code,
this change means that $q promises that utilze $evalAsync queue to
guarantee asynchronicity of promise apis will now also resolve outside
of a $digest, which turned out to be a big pain point for some developers.
The implementation ensures that we don't do more work than needed and
that we coalese as much work as possible into a single $digest.
The use of $browser instead of setTimeout ensures that we can mock out
and control the scheduling of "auto-flush", which should in theory
allow all of the existing code and tests to work without negative
side-effects.
Closes#3539Closes#2438
When calling $timeout.flush with or without a delay an exception should
be thrown if there is nothing to be flushed.
This prevents tests from flushing stuff unnecessarily.
BREAKING CHANGE: calling $timeout.flush(delay) when there is no task to be flushed
within the delay throws an exception now.
Please adjust the delay or remove the flush call from your tests as the exception
is a signed of a programming error.
This reverts commit 637c9b1611.
(ref #3633 and #3646)
The minimum bar for $sce is IE8 in standards mode. IE7 standards mode
is not supported. If you must support IE7, you should disable $sce
completely.
angular.module('ie7support', []).config(function($sceProvider) {
// Completely disable SCE to support IE7.
$sceProvider.enabled(false);
});
Changes documentMode test version to 7 in order to support IE 8 in IE 7 standards
mode while still protecting against quirks mode.
documentMode returns the following values:
5 - quirks mode,
7 - IE 7 standards mode,
8 - IE 8 standards mode.
Closes#3633Closes#3646
when the transluded content is being teleported to the translusion point, we should ensure that
the translusion point is empty before appending otherwise we end up with junk before the transcluded
content
previously the translusion was appended the the ngTranslude element via
$evalAsync which makes the transluded dom unavailable to parent
post-linking functions. By appending translusion in linking phase,
post-linking functions will be able to access it.
Code was evaluating !expression[key] while attempting to
see if the key was present, but this was evaluating to true for
false values as well as missing keys.
Closes#2797.
Make sure $timeout callbacks are forgotten about immediately after
execution or cancellation.
Previously when passing invokeApply=false, the cleanup used $q and so
would be pending until the next $digest was triggered. This does not
make a large functional difference, but can be very visible when
looking at memory consumption of an app or debugging around the
$$asyncQueue - these callbacks can have a big retaining tree.
After a recent refactoring using $location in the default hashbang mode would result
in hash url being initialized unnecessarily in cases when the base url didn't end
with a slash.
for example http://localhost:8000/temp.html would get rewritten as
http://location:8000/temp.html#/temp.html by error.
This fixes regression introduced by #3514 (5c560117) - this commit is being
reverted here and a better fix is included.
The regression caused the controller to be instantiated before the isolate scope
was initialized.
Closes#3493Closes#3482Closes#3537Closes#3540
BREAKING CHANGE: the `always` method has been renamed to `finally`.
The reason for this change is to align `$q` with the Q promises library,
despite the fact that this makes it a bit more difficult to
use with non-ES5 browsers, like IE8.
`finally` also goes well together with `catch` api that was added to
$q recently and is part of the DOM promises standard.
To migrate the code follow the example below:
Before:
$http.get('/foo').always(doSomething);
After:
$http.get('/foo').finally(doSomething);
or for IE8 compatible code:
$http.get('/foo')['finally'](doSomething);
Controllers should be always instantiated after compile fn runs, but before
pre-link fn runs. This way, controllers are available to pre-link fns that
request them.
Previously this was broken for async directives (directives with templateUrl).
Closes#3493Closes#3482Closes#3514
<form name="ctrl.form"> form controller will accessible
as $scope.ctrl.form instead of $scope['ctrl.form']
BREAKING CHANGE:
If you have form names that will evaluate as an expression:
<form name="ctrl.form">
And if you are accessing the form from your controller:
Before:
function($scope) {
$scope['ctrl.form'] // form controller instance
}
After:
function($scope) {
$scope.ctrl.form // form controller instance
}
This makes it possible to access a form from a controller
using the new "controller as" syntax. Supporting the previous
behavior offers no benefit.
The input field email regex does't not match long domain extensions. This commit extends the email regexp to take a 6 character TLD.
Example 6-character TLDs include .museum and .travel - (e.g. allabout.travel).
This fixes an inconsistency where you can't call the setter function
when the expression resolves to a top level field name on a promise.
Setting a field on an unresolved promise will throw an exception. (This
shouldn't really happen in your template/js code and points to a
programming error.)
Closes#1827
Normally $exceptionHandler doesn't throw an exception. It is normally
used just for logging and so on. But if an application developer
implemented a version that did throw an exception then $q would never
have called reject() when converting an exception thrown inside a `then`
handler into a rejected promise.
Change the implementation of isArrayLike to use one heavily based on the
implementation in jQuery in order to correctly detect array-like
objects, that way functionality like ngRepeat works as expected.
Support controller: 'MyController as my' syntax for directives which publishes
the controller instance to the directive scope.
Support controllerAs syntax to define an alias to the controller within the
directive scope.
Support controller: 'MyController as my' syntax for directives which publishes
the controller instance to the directive scope.
Support controllerAs syntax to define an alias to the controller within the
directive scope.
If ngClass fires off an add- or removeClass whilst the opposite animation is going on then
the animation will be skipped. The default behavior of ngClass was executing remoteClass
with an empty string while addClass had just fired. This commit fixes that bug.
BREAKING CHANGE: previously ngInclude only updated its content, after this change
ngInclude will recreate itself every time a new content is included. This ensures
that a single rootElement for all the included contents always exists, which makes
definition of css styles for animations much easier.
- ngAnimate directive is gone and was replaced with class based animations/transitions
- support for triggering animations on css class additions and removals
- done callback was added to all animation apis
- $animation and $animator where merged into a single $animate service with api:
- $animate.enter(element, parent, after, done);
- $animate.leave(element, done);
- $animate.move(element, parent, after, done);
- $animate.addClass(element, className, done);
- $animate.removeClass(element, className, done);
BREAKING CHANGE: too many things changed, we'll write up a separate doc with migration instructions
Changes:
- remove ng-bind-html-unsafe
- ng-bind-html is now in core
- ng-bind-html is secure
- supports SCE - so you can bind to an arbitrary trusted string
- automatic sanitization if $sanitize is available
BREAKING CHANGE:
ng-html-bind-unsafe has been removed and replaced by ng-html-bind
(which has been removed from ngSanitize.) ng-bind-html provides
ng-html-bind-unsafe like behavior (innerHTML's the result without
sanitization) when bound to the result of $sce.trustAsHtml(string).
When bound to a plain string, the string is sanitized via $sanitize
before being innerHTML'd. If $sanitize isn't available, it's logs an
exception.
