I'm reverting changes that were originally done to ngRepeat to fix#933,
because these are now not necessary after the previous changes to keep
ngModel always synced with the DOM.
In cases when we reuse elements in a repeater but associate
them with a new scope (see #933 - repeating over array of
primitives) it's possible for the internal ngModel state and
the scope state to get out of sync. This change ensure that
the two are always sync-ed up even in cases where we
reassociate an element with a different (but similar) scope.
In the case of repeating over array of primitives it's still
possible to run into issue if we iterate over primitives and
use form controls or similar widgets without ngModel - oh well,
we'd likely need a special repeater for primitives to deal
with this properly, even then there might be cornercases.
Closes#933
I'm keeping this in for future reference. The issue with this solution
is that if we shift() the first item in the array, the whole repeater
DOM will be rebuilt from scratch, we need to do better than that.
Bug caused by the use of the `||` operator to replace all non-truthy
values with an empty string. Changed to replace only `undefined` values.
Closes#1401
This fixes the issue that caused two attr interpolation observers
to be registered for the same attribute as a result of isolate
scope definition with attr (@) property for this attribute.
Duplicate observers would then fight with each other updating the
model.
The issue occured only when this directive was used in a repeater
because that's when we clone the template node which caused the
two observers to point to two different sets of $attr instances.
Closes#1166, #836
IEEE 754 floating point sometimes results in values that are very small,
rather than zero. One example is 1.0 + 1.07 - 2.07, which returns
4.440892098500626e-16 instead of 0.
This change tweaks the number formatting logic so that an exponential
value with a negative exponent that is larger than the precision+1
returns 0 instead. For example: with precision 2, anything with an
exponent of -4, -5 or more would become 0. 9e-3 = 0.009 = 0.01, but 9e-4
= 0.0009 = 0.001 = 0.00. This detail is unlikely to matter since this
quirk is usually only triggered with values very close to zero.
Closes#1469
This was really corner case:
Watcher needs to return changed value, to notify that model might have changed and one more $digest cycle needs to be performed.
The watcher, that takes care of reference binding into an isolate scope ("="), did not return changed value, if the change was from the isolate scope to the parent.
If any other watcher returned change, it worked fine, as this change caused re-digest.
Closes#1272
Current implementation of ngSrc may lead to empty src attribute when page is loading.
For example:
<img ng-src="{{image.url}}">
can be temporarily rendered as
<img src="">
before the image resource is loaded.
Some browser emits a request to the current page when seeing <img src=""> (Firefox13 and IE8 will, Chromium20 won't), which leads to performance problems.
Makes the time zone optional in the date filter
Problem with the current R_ISO8601_STR regex was that the time was optional, but the zone was not.
This results in the filter not formatting local date times, which it could easily do.
For example:
2012-08-30 -> formatted
2012-08-30T06:06:06.123Z -> formatted
2012-08-30T06:06:06.123 -> NOT formatted
A simple change in the regex fixes this. Arguably this is closer to the ISO8601 spec which specifies
local dates being in the "current time zone" and not requiring a Z. In any case it behaves more like
a user would expect.
it turns out that some stuff doesn't work in xhtml as it does in html.
for example can't be innerHTML-ed and auto-closing of elements
doesn't work.
the reporter of the referenced issue claimed that innerHTML vs text on
script made a difference but that doesn't appear to be true in my testing.
I'm not including test for this because testacular doesn't currently
run tests in xhtml yet.
Closes#1301
Since developers are allowed to customize start/end interpolation
strings, but third-party directive creators don't know about these
customizations, we should standardize on {{ }} in templates of
reusable (third-party) directives. During the compilation, these
templates are then denormalized to use whatever the custom
start/end symbol is, effectively translating the template into the
syntax of the runtime environment.
This addresses an issue raised at http://goo.gl/e8VPV
Existing code should not be affected by this change since project
that do use custom interpolation markers are not expected to use
{{ }} in existing directive templates.
previously we expected to find option elements only within select element and if
that was not the case we throw an error. This made it impossible to include datalist
element with nested option elements in the template.
Closes#1165
this fix ensures that we prevent the default action on form submission
(full page reload) even in cases when the form is being destroyed as
a result of the submit event handler (e.g. when route change is
triggered).
The fix is more complicated than I'd like it to be mainly because
we need to ensure that we don't create circular references between
js closures and dom elements via DOM event handlers that would then
result in a memory leak.
Also the differences between IE8, IE9 and normal browsers make testing
this ugly.
Closes#1238
When user clicks a link, $location needs to intercept this event. The <a> doesn't have to be target element of the DOM event, so it needs to traverse the DOM, to find first <a> parent.
If the target element was removed from DOM, during the same event, it would throw an exception. This fixes the issue.
Closes#1058
This is a second fix for a regression that was introduced by 92a2e180.
The fix addresses scenarios when the $location service is configured with
a hash prefix.
Closes#1037
we now have two types of namespaces:
- true namespace: angular.* - used for all global apis
- virtual namespace: ng.*, ngMock.*, ... - used for all DI modules
the virual namespaces have services under the second namespace level (e.g. ng.)
and filters and directives prefixed with filter: and directive: respectively
(e.g. ng.filter:orderBy, ng.directive:ngRepeat)
this simplifies urls and makes them a lot shorter while still avoiding name collisions
Changed the isolate scope binding options to:
- @attr - attribute binding (including interpolation)
- =model - by-directional model binding
- &expr - expression execution binding
This change simplifies the terminology as well as
number of choices available to the developer. It
also supports local name aliasing from the parent.
BREAKING CHANGE: isolate scope bindings definition has changed and
the inject option for the directive controller injection was removed.
To migrate the code follow the example below:
Before:
scope: {
myAttr: 'attribute',
myBind: 'bind',
myExpression: 'expression',
myEval: 'evaluate',
myAccessor: 'accessor'
}
After:
scope: {
myAttr: '@',
myBind: '@',
myExpression: '&',
// myEval - usually not useful, but in cases where the expression is assignable, you can use '='
myAccessor: '=' // in directive's template change myAccessor() to myAccessor
}
The removed `inject` wasn't generaly useful for directives so there should be no code using it.
attr.$observe used to call function only if there was interpolation
on that attribute. We now call the observation function all the time
but we only save the reference to it if interpolation is present.
$timeout has a better name ($defer got often confused with something related to $q) and
is actually promise based with cancelation support.
With this commit the $defer service is deprecated and will be removed before 1.0.
Closes#704, #532
$position marker doesn't work well in cases when we have just one item
in the list because then the item is both the first and last. To solve
this properly we need to expose individual $first and $middle and $last
flags.
BREAKING CHANGE: $position is not exposed in repeater scopes any more
To update, search for $position and replace it with one of $first,
$middle or $last.
Closes#912
