Fixed inconsistency in $location.path() behaviour on the $locationChangeStart event when using
back/forward buttons in the browser or manually changing the url in the address bar.
$location.path() now returns the target url in these cases.
Closes#4989Closes#5089Closes#5118Closes#5580
With this change it's possible to split the ng-repeat expression into multiple
lines at any point in the expression where white-space is expected.
Closes#5537Closes#5598
On mobile webkit `onreadystatechange` might by called multiple times
with `readyState===4` caused by xhrs that are resolved while the app is
in the background.
Fixes#5426.
FF 26.0 now throws:
"TypeError: NodeList doesn't have an indexed property setter."
when we try to assign to `childNodes[1]`, since this test still works properly
on Chrome and the issue being tested is not a cross-browser issues, I'm
just making the patchability check more robust instead of trying to figure
out how to make this test fully pass on FF.
If an event was performed natively, jQuery sets the isTrigger property.
When triggering event manually, the field is not present. Manually
triggered events are performed synchronously which causes the "$digest
already in progress" error.
Closes#5293
Update $on and $destroy to maintain a count of event keys registered for each scope and its children.
$broadcast will not descend past a node that has a count of 0/undefined for the $broadcasted event key.
Closes#5341Closes#5371
It appears that this exceptional case was only valid for IE<8 and that for IE>=8 it
was actually causing a bug with the `ng-href-attr` directive on `<a>` elements.
Closes#5479
Prior to this fix, $parse/$eval would return 'null' if a middle key in
an expression's value is null, when it should be expected to be undefined.
This patch tries to remedy this by returning undefined for middle values in
expressions, when fetching a child of that null value.
For example:
```js
// Given the following object:
$scope.a = {
b: null
};
// $scope.$eval('a.b.c') returns undefined, whereas previously it would return null
```
Closes#5480
Before this fix, the xlink:href property of an SVG <a> element could not be parsed
on click, as the property is an SVGAnimatedString rather than a DOMString.
This patch parses the xlink:href's animVal into a DOMString in order to prevent
an `Object #<SVGAnimatedString> has no method 'indexOf'` exception from being thrown,
and also to update the location if necessary as expected.
Closes#5472Closes#5198Closes#5199Closes#4098Closes#1420
Use a faster path when the number of path tokens is low (ie the common case).
This results in a better than 19x improvement in the time spent in $parse and
produces output that is about the same speed in chrome and substantially faster
in firefox.
http://jsperf.com/angularjs-parse-getter/6Closes#5359
When `multiple` attribute is set on a `<select>` control and the model value is an empty array,
we should invalidate the control. Previously, this directive was using incorrect logic for
determining if the model was empty.
Closes#5337
jQuery's elem.html('') is way slower than elem.empty(). As clearing
element contents happens quite often in certain scenarios, switching
to using .empty() provides a significant performance boost when using
Angular with jQuery.
Closes#4457
Change the a directive to link and hookup a click event only when
there is no href or name in the template element.
In a large Google app, this results in about 800 fewer registrations,
saving a small but measurable amount of time and memory.
Closes#5362
When a component uses an isolate scope reference
and the the component is used with an object literal
a new object is created on every evaluation.
Therefore the compiler needs to compare
the values of the parent and the isolate scope
using object equality and not object reference
equality.
Fixes#5296.
If an element has a directive whose content is loaded using `templateUrl`,
and the element is cloned using a linking function before the template arrives,
the clone needs to be updated as well.
This also updates `ngIf` and `ngRepeat` to keep the connection to the clone
of a tranclude function, so that they know about the changes a directive with
`templateUrl` does to the element in the future.
Fixes to #4930.
Stop dirty-checking during $digest after the last dirty watcher has been re-checked.
This prevents unneeded re-checking of the remaining watchers (They were already
checked in the previous iteration), bringing a substantial performance improvement
to the average case run time of $digest.
Closes#5272Closes#5287
The priority of ngInit is adjusted to occur before ngInclude, and after
ngController. This enables ngInit to initiallize values in a controller's
scope, and also to initiallize values before ngInclude executes.
Closes#5167Closes#5208
Due to an earlier change, ngModelWatch() no longer returns a value to the
caller. This means the digest loop has no way to tell if the watch actually
modified anything and so can not schedule another pass.
This means any watches that watch form or model controller changes
(e.g. watches on form.$valid) that are scheduled prior to an ngModelWatch()
will not be able to see any changes made therin.
This commit fixes this behavior by returning the latest evaluated ng-model
value.
Closes#5258Closes#5282
When using two-way binding with isolate scope, under some circumstances
the lastValue variable captured in the parentValueWatch function can get
out of sync.
Specifically, if both the value in the origin scope as well as the value
in the isolate scope get independently updated to the same value within
one digest cycle, the lastValue is never updated. This potentially causes
the watch to make the wrong decision as to which side to update on subsequent
passes.
This fixes things by ensuring lastValue is always set to the last seen
value even if the watch's logic was short circuited because there was no
difference between the values in the original and isolate scopes.
Closes#5182
The urlResolve method was fixed to automatically remove the
volume label from path names to fix issues with the file
protocol on windows where $location.path() was returning
paths where the first segment would be the volume name,
such as "/C:/mypath". See #4942 and #4928
However, the solution was specific to the $location non-
HTML5 mode, and was implemented at a lower level of
abstraction than it should have been. This refactor moves
the fix to inside of the LocationHashBangUrl $$parse method.
Closes#5041
`$sanitize` now uses the same mechanism as `$compile` to validate uris.
By this, the validation in `$sanitize` is more general and can be
configured in the same way as the one in `$compile`.
Changes
- Creates the new private service `$$sanitizeUri`.
- Moves related specs from `compileSpec.js` into `sanitizeUriSpec.js`.
- Refactors the `linky` filter to be less dependent on `$sanitize`
internal functions.
Fixes#3748.
Previously if an app was running from file:// origin we would always return either
http 200 or 404 depending on whether the response was present.
This changes the behavior so that we do this only if the protocol of the request
(not the origin) is file:// and only if the status code is 0.
Closes#4436Closes#4587Closes#4514
Although modern browser support the "input" event, they still only fire
the "change" event when they auto complete form elements
other than the currently selected one.
Related to #1460
IE8, IE9 and IE10 can use `script.onreadystate` so up till now we have been using this
if the sniffer says we are on IE.
But IE11 now does not support `script.onreadystate` and only supports the more standard
`script.onload` and `script.onerror`.
IE9 and IE10 do support `script.onload` and `script.onerror`. So now we only test whether
we are on IE8 or earlier before using `script.onreadystate`.
See http://pieisgood.org/test/script-link-events/
jQuery just uses all these handlers at once and hopes for the best, but since IE9 and IE10
support both sets of handlers, this could cause the handlers to be run more than once.
jQuery also notes that there is a potential memory leak in IE unless we remove the handlers
from the script object once they are run. So we are doing this too, now.
Closes#4523Closes#4527Closes#4922
Previously, when unwrapping promises was set to `true`,
an error would occur if a parsed expression had a
new line in it.
This was because when generating the `evaledFnGetter` code,
a new line in an parsed expression would create a new line
in a JS string in that code, which is illegal. That is:
```js
pw("A+
B")
```
Closes#4718
When a request is aborted, it makes no sense to read the response headers or text.
Also in IE9, trying to read data (either response headers or text) from an aborted request
throws an Error c00c023f.
Fixes#4913Closes#4940
When $compile interpolates a CSS class attribute expression it will
do so by comparing the CSS class value already present on the element.
This may lead to unexpected results when dealing with ngClass values being
added and removed therefore it is best that both compile and ngClass delegate
addClass/removeClass operations to the same block of code.
ngClass works by removing all the former classes and then adding all the
new classes to the element during each watch change operation. This may
cause transition animations to never render. The ngClass directive will
now only add and remove the classes that change during each watch operation.
Closes#4960Closes#4944
In 1.2, the behavior of ngInclude was modified to use DOM APIs rather than jqLite. This means that
even when jQuery was loaded, ngInclude was not calling into it, and thus scripts were not eval'd
as they had been before. Although the use of ngInclude to eval scripts as a lazy-loading strategy
was never an intentional feature, this patch restores the ability to do so.
Closes#3756
Additional API (backwards compatible)
- Injects `$transclude` (see directive controllers) as 5th argument to directive link functions.
- `$transclude` takes an optional scope as first parameter that overrides the
bound scope.
Deprecations:
- `transclude` parameter of directive compile functions (use the new parameter for link functions instead).
Refactorings:
- Don't use comment node to temporarily store controllers
- `ngIf`, `ngRepeat`, ... now all use `$transclude`
Closes#4935.
Hiding `_*` properties was a feature primarily for developers using Closure compiler and Google JS
style. We didn't realize how many people will be affected by this change.
We might introduce this feature in the future, probably under a config option, but it needs more
research and so I'm reverting the change for now.
This reverts commit 3d6a89e888.
Closes#4926Closes#4842Closes#4865Closes#4859Closes#4849
Conflicts:
src/ng/parse.js
Prior to this fix, the urlResolve method would automatically
strip the first segment of a path if the segment ends in a colon.
This was to correct undesired behavior in the $location service
using the file protocol on windows in multiple browsers (see #4680).
However, there could be cases where users intentionally
have first path segments that end in a colon
(although this conflicts with section 3.3 of rfc3986).
The solution to this problem is an extra check to make sure
the first path segment of the input url does not end with a colon,
to make sure we're only removing undesired path segments.
Fixes#4939
