Previously if an app was running from file:// origin we would always return either
http 200 or 404 depending on whether the response was present.
This changes the behavior so that we do this only if the protocol of the request
(not the origin) is file:// and only if the status code is 0.
Closes#4436Closes#4587Closes#4514
Although modern browser support the "input" event, they still only fire
the "change" event when they auto complete form elements
other than the currently selected one.
Related to #1460
IE8, IE9 and IE10 can use `script.onreadystate` so up till now we have been using this
if the sniffer says we are on IE.
But IE11 now does not support `script.onreadystate` and only supports the more standard
`script.onload` and `script.onerror`.
IE9 and IE10 do support `script.onload` and `script.onerror`. So now we only test whether
we are on IE8 or earlier before using `script.onreadystate`.
See http://pieisgood.org/test/script-link-events/
jQuery just uses all these handlers at once and hopes for the best, but since IE9 and IE10
support both sets of handlers, this could cause the handlers to be run more than once.
jQuery also notes that there is a potential memory leak in IE unless we remove the handlers
from the script object once they are run. So we are doing this too, now.
Closes#4523Closes#4527Closes#4922
Previously, when unwrapping promises was set to `true`,
an error would occur if a parsed expression had a
new line in it.
This was because when generating the `evaledFnGetter` code,
a new line in an parsed expression would create a new line
in a JS string in that code, which is illegal. That is:
```js
pw("A+
B")
```
Closes#4718
When a request is aborted, it makes no sense to read the response headers or text.
Also in IE9, trying to read data (either response headers or text) from an aborted request
throws an Error c00c023f.
Fixes#4913Closes#4940
When $compile interpolates a CSS class attribute expression it will
do so by comparing the CSS class value already present on the element.
This may lead to unexpected results when dealing with ngClass values being
added and removed therefore it is best that both compile and ngClass delegate
addClass/removeClass operations to the same block of code.
ngClass works by removing all the former classes and then adding all the
new classes to the element during each watch change operation. This may
cause transition animations to never render. The ngClass directive will
now only add and remove the classes that change during each watch operation.
Closes#4960Closes#4944
In 1.2, the behavior of ngInclude was modified to use DOM APIs rather than jqLite. This means that
even when jQuery was loaded, ngInclude was not calling into it, and thus scripts were not eval'd
as they had been before. Although the use of ngInclude to eval scripts as a lazy-loading strategy
was never an intentional feature, this patch restores the ability to do so.
Closes#3756
Additional API (backwards compatible)
- Injects `$transclude` (see directive controllers) as 5th argument to directive link functions.
- `$transclude` takes an optional scope as first parameter that overrides the
bound scope.
Deprecations:
- `transclude` parameter of directive compile functions (use the new parameter for link functions instead).
Refactorings:
- Don't use comment node to temporarily store controllers
- `ngIf`, `ngRepeat`, ... now all use `$transclude`
Closes#4935.
Hiding `_*` properties was a feature primarily for developers using Closure compiler and Google JS
style. We didn't realize how many people will be affected by this change.
We might introduce this feature in the future, probably under a config option, but it needs more
research and so I'm reverting the change for now.
This reverts commit 3d6a89e888.
Closes#4926Closes#4842Closes#4865Closes#4859Closes#4849
Conflicts:
src/ng/parse.js
Prior to this fix, the urlResolve method would automatically
strip the first segment of a path if the segment ends in a colon.
This was to correct undesired behavior in the $location service
using the file protocol on windows in multiple browsers (see #4680).
However, there could be cases where users intentionally
have first path segments that end in a colon
(although this conflicts with section 3.3 of rfc3986).
The solution to this problem is an extra check to make sure
the first path segment of the input url does not end with a colon,
to make sure we're only removing undesired path segments.
Fixes#4939
Chrome and other browsers on Windows often
append the drive name to the pathname,
as described in #4680. This would cause
the location service to browse to odd
URLs, such as /C:/myfile.html,
when opening apps using file://.
Fixes #4680
See doc update in the diff for more info.
BREAKING CHANGE: jqLite#scope() does not return the isolate scope on the element
that triggered directive with isolate scope. Use jqLite#isolateScope() instead.
When an isolate scope directive is also a "replace" directive and at the root of its template
it has other directives, we need to keep track remember to use isolate scope when linking
these.
This commit fixes the leakage of this state when this directive is used again later inside
or outside of the isolate directive template.
Fixes an issue when we didn't share the isolate scope with the controller
of the directive from the isolate directive's template when this directive
was replaced onto the isolate directive element.
I had to fix one unit test, as it assumed the broken behavior, where application template gets the
isolate scope of other (isolate) directive, rather than the regular scope.
BREAKING CHANGE: Child elements that are defined either in the application template or in some other
directives template do not get the isolate scope. In theory, nobody should rely on this behavior, as
it is very rare - in most cases the isolate directive has a template.
Fixes issue with isolate scope leaking all over the place into other directives on the same element.
Isolate scope is now available only to the isolate directive that requested it and its template.
A non-isolate directive should not get the isolate scope of an isolate directive on the same element,
instead they will receive the original scope (which is the parent scope of the newly created isolate scope).
Paired with Tobias.
BREAKING CHANGE: Directives without isolate scope do not get the isolate scope from an isolate directive on the same element. If your code depends on this behavior (non-isolate directive needs to access state from within the isolate scope), change the isolate directive to use scope locals to pass these explicitly.
// before
<input ng-model="$parent.value" ng-isolate>
.directive('ngIsolate', function() {
return {
scope: {},
template: '{{value}}'
};
});
// after
<input ng-model="value" ng-isolate>
.directive('ngIsolate', function() {
return {
scope: {value: '=ngModel'},
template: '{{value}}
};
});
Closes#1924Closes#2500
We need to wait until animations have added the content to the document before
trying to `autoscroll` to anchors that may have been inserted.
Fixes#4723
The msie variable is a global variable used within the ng core which contains the
version number for the current Internet Explorer browser that is rendering the
application. Other modules outside of the ng core could make use of this variable
instead of having to rollout duplicate detection code. This code makes it easy to
reuse this simple property within the $sniffer service.
Due to animations, DOM might get destroyed much later than scope and so the element $destroy event
might get fired outside of $digest, which causes changes to the validation model go unobserved
until the next digest. By deregistering on scope event, the deregistration always happens
in $digest and the form validation model changes will be observed.
Closes#4226Closes#4779
BREAKING CHANGE:
This commit introduces the notion of "private" properties (properties
whose names begin and/or end with an underscore) on the scope chain.
These properties will not be available to Angular expressions (i.e. {{
}} interpolation in templates and strings passed to `$parse`) They are
freely available to JavaScript code (as before).
Motivation
----------
Angular expressions execute in a limited context. They do not have
direct access to the global scope, Window, Document or the Function
constructor. However, they have direct access to names/properties on
the scope chain. It has been a long standing best practice to keep
sensitive APIs outside of the scope chain (in a closure or your
controller.) That's easier said that done for two reasons: (1)
JavaScript does not have a notion of private properties so if you need
someone on the scope chain for JavaScript use, you also expose it to
Angular expressions, and (2) the new "controller as" syntax that's now
in increased usage exposes the entire controller on the scope chain
greatly increaing the exposed surface. Though Angular expressions are
written and controlled by the developer, they (1) typically deal with
user input and (2) don't get the kind of test coverage that JavaScript
code would. This commit provides a way, via a naming convention, to
allow publishing/restricting properties from controllers/scopes to
Angular expressions enabling one to only expose those properties that
are actually needed by the expressions.
When using ngIf with ngInclude on the same element, ngIf previously did not remove
elements added by ngInclude. Similarly, when using ngIfStart/End, ngIf will miss
elements added between the start/end markers added after ngIf is linked.
This commit changes the behavior of ngIf to add a comment node at the end of its
elements such that elements between the starting comment and this ending comment
are removed when ngIf's predicate does not hold.
Recently we changed the priority of attribute interpolation directive to -100
to ensure that it executes early in the post linking phase. This causes issues
with when terminal directives are placed on elements with attribute bindings
because the terminal directive will usually have 0 or higher priority which
results in attr interpolation directive not being applied to the element.
To fix this issue I'm switching the priority back to 100 and making moving the
binding setup into the pre-linking function.
This means that:
- terminal directives with priority lower than 100 will not affect the attribute
binding
- if a directive wants to add or alter bindings it can do so in the pre-linking
phase, as long as the priority of this directive is more than 100
- all post-linking functions will execute after the attribute binding has been
set up
- all pre-linking functions with directive priority lower than 100 will execute
after the attribute bindings have been setup
BREAKING CHANGE: the attribute interpolation (binding) executes as a directive
with priority 100 and the binding is set up in the pre-linking phase. It used
to be that the priority was -100 in rc.2 (100 before rc.2) and that the binding
was setup in the post-linking phase.
Closes#4525Closes#4528Closes#4649
When we re-enter compilation either due to async directive templates or element transclude directive
we need to keep track of controllers to instantiate during linking.
This piece of info was missing when re-entering compilation and that's what this commit fixes.
I also reordered the properties in the previousCompileContext object.
Closes#4434Closes#4616
When we refactored , we broke the csp mode because the previous implementation
relied on the fact that it was ok to lazy initialize the .csp property, this
is not the case any more.
Besides, we need to know about csp mode during bootstrap and avoid injecting the
stylesheet when csp is active, so I refactored the code to fix both issues.
PR #4411 will follow up on this commit and add more improvements.
Closes#917Closes#2963Closes#4394Closes#4444
BREAKING CHANGE: triggering ngCsp directive via `ng:csp` attribute is not
supported any more. Please use data-ng-csp instead.
Issue an error and abort compilation when two directives that ask for transclusion are found
on a single element. This configuration is not supported and we previously failed to issue
the error because in the case of element transclusion the compilation is re-started and this
caused the compilation context to be lost.
The ngRepeat directive has been special-cased to bypass this warning because it knows how to
handle this scenario internally.
This is not an ideal solution to the problem of multiple transclusions per element, we are
hoping to have this configuration supported by the compiler in the future. See #4357.
Closes#3893Closes#4217Closes#3307
The location service, and other portions of the application,
were relying on a complicated regular expression to get parts of a URL.
But there is already a private urlUtils provider,
which relies on HTMLAnchorElement to provide this information,
and is suitable for most cases.
In order to make urlUtils more accessible in the absence of DI,
its methods were converted to standalone functions available globally.
The urlUtils.resolve method was renamed urlResolve,
and was refactored to only take 1 argument, url,
and not the 2nd "parse" boolean.
The method now always returns a parsed url.
All places in code which previously wanted a string instead of a parsed
url can now get the value from the href property of the returned object.
Tests were also added to ensure IPv6 addresses were handled correctly.
Closes#3533Closes#2950Closes#3249
Issue: multi-elements ng-repeat (ng-repeat-start, ng-repeat-end) can contain elements with a trancluding directive. This directive changes content of the row (template) and ng-repeat does not work correctly (when removing/moving rows), because ng-repeat works with the original template (elements).
This changes ng-repeat behavior to traverse the DOM to find current elements everytime we are moving/removing rows (if the template has multiple elements).
Closes#3104
This reverts commit 3a65822023.
The change cased regressions in third party components that require
promises from getter functions not to be unwrapped.
Since we have deprecated the promise unwrapping support in $parse it
doesn't make much sense to fix this issue and deal with regressions in
third party code.
Closes#4158
This commit disables promise unwrapping and adds
$parseProvider.unwrapPromises() getter/setter api that allows developers
to turn the feature back on if needed. Promise unwrapping support will
be removed from Angular in the future and this setting only allows for
enabling it during transitional period.
If the unwrapping is enabled, Angular will log a warning about each
expression that unwraps a promise (to reduce the noise, each expression
is logged only onces). To disable this logging use
`$parseProvider.logPromiseWarnings(false)`.
Previously promises found anywhere in the expression during expression
evaluation would evaluate to undefined while unresolved and to the
fulfillment value if fulfilled.
This is a feature that didn't prove to be wildly useful or popular,
primarily because of the dichotomy between data access in templates
(accessed as raw values) and controller code (accessed as promises).
In most code we ended up resolving promises manually in controllers
or automatically via routing and unifying the model access in this way.
Other downsides of automatic promise unwrapping:
- when building components it's often desirable to receive the
raw promises
- adds complexity and slows down expression evaluation
- makes expression code pre-generation unattractive due to the
amount of code that needs to be generated
- makes IDE auto-completion and tool support hard
- adds too much magic
BREAKING CHANGE: $parse and templates in general will no longer
automatically unwrap promises. This feature has been deprecated and
if absolutely needed, it can be reenabled during transitional period
via `$parseProvider.unwrapPromises(true)` api.
Closes#4158Closes#4270
`checkboxInputType` and `ngList` directives need to have special logic for whether
they are empty or not. Previously this had been hard coded into their
own directives or the `ngRequired` directive. This made it difficult to handle
these special cases.
This change factors out the question of whether an input is empty into a method
`$isEmpty` on the `ngModelController`. The `ngRequired` directive now uses this
method when testing for validity and directives, such as `checkbox` or `ngList`
can override it to apply logic specific to their needs.
Closes#3490, #3658, #2594
The $interval service simplifies creating and testing recurring tasks.
This service does not increment $browser's outstanding request count,
which means that scenario tests and Protractor tests will not timeout
when a site uses a polling function registered by $interval. Provides
a workaround for #2402.
For unit tests, repeated tasks can be controlled using ngMock$interval's
tick(), tickNext(), and tickAll() functions.
Objects received from outside AngularJS may have had their `hasOwnProperty`
method overridden with something else. In cases where we can do this without
incurring a performance penalty we call directly on Object.prototype.hasOwnProperty
to ensure that we use the correct method.
Also, we have some internal hash objects, where the keys for the map are provided
from outside AngularJS. In such cases we either prevent `hasOwnProperty` from
being used as a key or provide some other way of preventing our objects from
having their `hasOwnProperty` overridden.
BREAKING CHANGE: Inputs with name equal to "hasOwnProperty" are not allowed inside
form or ngForm directives.
Before, inputs whose name was "hasOwnProperty" were quietly ignored and not added
to the scope. Now a badname exception is thrown.
Using "hasOwnProperty" for an input name would be very unusual and bad practice.
Either do not include such an input in a `form` or `ngForm` directive or change
the name of the input.
Closes#3331
This reduces memory consumption of parsed angular expressions and
speeds up parsing.
This JSPerf case demonstrates the performance boost:
http://jsperf.com/closure-vs-prototype-ngparser
Chrome: 1.5–2x boost
FF: slightly slower (I would love to know why)
IE: 4x boost
To be clear, this doesn't have any impact on runtime performance
of expressions as demostrated in this JSPerf:
http://jsperf.com/angular-parser-changesCloses#3681
previously the compile/link fns executed in this order controlled via priority:
- CompilePriorityHigh, CompilePriorityMedium, CompilePriorityLow
- PreLinkPriorityHigh, PreLinkPriorityMedium, PreLinkPriorityLow
- link children
- PostLinkPriorityHigh, PostLinkPriorityMedium, PostLinkPriorityLow
This was changed to:
- CompilePriorityHigh, CompilePriorityMedium, CompilePriorityLow
- PreLinkPriorityHigh, PreLinkPriorityMedium, PreLinkPriorityLow
- link children
- PostLinkPriorityLow, PostLinkPriorityMedium , PostLinkPriorityHigh
Using this order the child transclusion directive that gets replaced
onto the current element get executed correctly (see issue #3558),
and more generally, the order of execution of post linking function
makes more sense. The incorrect order was an oversight that has
gone unnoticed for many suns and moons.
(FYI: postLink functions are the default linking functions)
BREAKING CHANGE: the order of postLink fn is now mirror opposite of
the order in which corresponding preLinking and compile functions
execute.
Very few directives in practice rely on order of postLinking function
(unlike on the order of compile functions), so in the rare case
of this change affecting an existing directive, it might be necessary
to convert it to a preLinking function or give it negative priority
(look at the diff of this commit to see how an internal attribute
interpolation directive was adjusted).
Closes#3558
Previously we would stop the compilation for both regular and element
transclusion directives which was wrong. Only element transclusion directives
should be terminal.
Refactored `replacedUrl` to store the new URL on both
`location.replace` and setting `location.href` directly to handle
delays in the actual location value change in IE.
Closes#2802
Fix wrong behaviour that didn't allow 'data-on' and 'on' element attributes
to be interpolated by $compile. The regex now accepts any string beginning
with 'on' and with at least one more English letter.
This is a breaking change. To migrate to the new behavior,
delete or set headers to `undefined` to avoid having them sent.
To restore the old behavior, override `$httpBackendProvider`
with the old implementation.
Closes#2984
The `XMLHttpRequest.send` spec defines different semantics for `null`
than for an empty String: an empty String should be sent with a
`Content-Type` of `text/plain`, whereas `null` should have no
`Content-Type` header set.
Closes#2149
This feature adds similar functionality to what `$ControllerProvider.register`
and `$CompileProvider.directive` currently provide by allowing a map of filter
name/factories to be passed as the sole argument to `$FilterProvider.register`
to register all of the specified filters.
Closes#4036Closes#4091
How did compiling a templateUrl (async) directive with `replace:true` work before this commit?
1/ apply all directives with higher priority than the templateUrl directive
2/ partially apply the templateUrl directive (create `beforeTemplateNodeLinkFn`)
3/ fetch the template
4/ apply second part of the templateUrl directive on the fetched template
(`afterTemplateNodeLinkFn`)
That is, the templateUrl directive is basically split into two parts (two `nodeLinkFn` functions),
which has to be both applied.
Normally we compose linking functions (`nodeLinkFn`) using continuation - calling the linking
function of a parent element, passing the linking function of the child elements as an argument. The
parent linking function then does:
1/ execute its pre-link functions
2/ call the child elements linking function (traverse)
3/ execute its post-link functions
Now, we have two linking functions for the same DOM element level (because the templateUrl directive
has been split).
There has been multiple issues because of the order of these two linking functions (creating
controller before setting up scope locals, running linking functions before instantiating
controller, etc.). It is easy to fix one use case, but it breaks some other use case. It is hard to
decide what is the "correct" order of these two linking functions as they are essentially on the
same level.
Running them side-by-side screws up pre/post linking functions for the high priority directives
(those executed before the templateUrl directive). It runs post-linking functions before traversing:
```js
beforeTemplateNodeLinkFn(null); // do not travers
afterTemplateNodeLinkFn(afterTemplateChildLinkFn);
```
Composing them (in any order) screws up the order of post-linking functions. We could fix this by
having post-linking functions to execute in reverse order (from the lowest priority to the highest)
which might actually make a sense.
**My solution is to remove this splitting.** This commit removes the `beforeTemplateNodeLinkFn`. The
first run (before we have the template) only schedules fetching the template. The rest (creating
scope locals, instantiating a controller, linking functions, etc) is done when processing the
directive again (in the context of the already fetched template; this is the cloned
`derivedSyncDirective`).
We still need to pass-through the linking functions of the higher priority directives (those
executed before the templateUrl directive), that's why I added `preLinkFns` and `postLinkFns`
arguments to `applyDirectivesToNode`.
This also changes the "$compile transclude should make the result of a transclusion available to the
parent directive in post- linking phase (templateUrl)" unit test. It was testing that a parent
directive can see the content of transclusion in its pre-link function. That is IMHO wrong (as the
`ngTransclude` directive inserts the translusion in its linking function). This test was only passing because of
c173ca4128, which changed the behavior of the compiler to traverse
before executing the parent linking function. That was wrong and also caused the #3792 issue, which
this change fixes.
Closes#3792Closes#3923Closes#3935Closes#3927
jqLite previously used `elt.className` to add and remove classes from a DOM Node, but
because the className property is not writable on SVG elements, it doesn't work with
them. This patch replaces accesses to `className` with `get/setAttribute`.
`classList` was also considered as a solution, but because only IE10+ supports it, we
have to wait. :'(
The JqLiteAddClass/JQLiteRemoveClass methods are now also used directly by $animate
to work around the jQuery not being able to handle class modifications on SVG elements.
Closes#3858
The problem was in keeping the values of `attrNameStart` and `attrNameEnd` between directive loop iterations which lead to the compiler looking for multi-element ranges for any directives that happened to be in the directive list after one that was applied on a range. For instance, having a ng-repeat-start and ng-class on a single element with ng-repeat being resolved first made the compiler look for an ng-repeat-end for both ng-repeat and ng-class because the `attrNameEnd` was not reset to a falsy value before the second iteration. As the result, an exception saying the block end element could not be found and the second directive was not actually applied.
Closes#4002
Previously if the collection model was set to undefined on the first digest,
the repeater would get confused and not use the correct tracking function
for associating model with dom elements in the repeater.
Closes#4145Closes#3964
Ref: https://github.com/angular/angular.js/pull/4045
I have this sinking feeling that support this use case sort of
encourages binding to function that blindly trust some html. For now,
I'm fixing the issue while I think about the use cases some more.
In the case of a function that performs any non-trivial work before
wrapping the value (e.g. the showdown filter in issue #3980, or the
binding to a simply wrapper function in issue #3932 if it did anything
meaty), this fix makes it "work" - but performance is going to suck -
you should bind to some other thing on scope that watches the actual
source and adjusts itself when that changes (e.g. the showdown filter.)
For the case of the wrapper in #3932, if one isn't performing
sanitization or some such thing - then you the developer has insight
into why that value is safe in that particular context - and it should
be available simply by name and not as a result of a function taking any
arbitrary input to make auditing of security a little saner.
Closes#3932, #3980
BREAKING CHANGE: ngInclude's priority is now set to 1000
It's quite rare for anyone to depend on explicity directive priority,
but if a custom directive that needs to run before ngInclude exists,
it should have its priority checked and adjusted if needed.
Closes#3793
It's great that IE11 wants to be compatible enough that it doesn't want
to be special cased and treated differently.
However, as long as one has to have a different code path for IE than
for the other supported browsers, we still need to detect and special
case it. For instance, our URL parsing code still needs the same
workaround the we used for IE10. We still see the same Access denied /
TypeError exceptions when setting certain values. FYI, Angular doesn't
generally blindly test for IE – we also check the version number.
Thanks to modern.ie for the free IE11 test VM.
Closes#3682
This change causes a new $digest to be scheduled in the next tick if
a task was was sent to the $evalAsync queue from outside of a $digest
or an $apply.
While this mode of operation is not common for most of the user code,
this change means that $q promises that utilze $evalAsync queue to
guarantee asynchronicity of promise apis will now also resolve outside
of a $digest, which turned out to be a big pain point for some developers.
The implementation ensures that we don't do more work than needed and
that we coalese as much work as possible into a single $digest.
The use of $browser instead of setTimeout ensures that we can mock out
and control the scheduling of "auto-flush", which should in theory
allow all of the existing code and tests to work without negative
side-effects.
Closes#3539Closes#2438
When calling $timeout.flush with or without a delay an exception should
be thrown if there is nothing to be flushed.
This prevents tests from flushing stuff unnecessarily.
BREAKING CHANGE: calling $timeout.flush(delay) when there is no task to be flushed
within the delay throws an exception now.
Please adjust the delay or remove the flush call from your tests as the exception
is a signed of a programming error.
This reverts commit 637c9b1611.
(ref #3633 and #3646)
The minimum bar for $sce is IE8 in standards mode. IE7 standards mode
is not supported. If you must support IE7, you should disable $sce
completely.
angular.module('ie7support', []).config(function($sceProvider) {
// Completely disable SCE to support IE7.
$sceProvider.enabled(false);
});
Changes documentMode test version to 7 in order to support IE 8 in IE 7 standards
mode while still protecting against quirks mode.
documentMode returns the following values:
5 - quirks mode,
7 - IE 7 standards mode,
8 - IE 8 standards mode.
Closes#3633Closes#3646
when the transluded content is being teleported to the translusion point, we should ensure that
the translusion point is empty before appending otherwise we end up with junk before the transcluded
content
previously the translusion was appended the the ngTranslude element via
$evalAsync which makes the transluded dom unavailable to parent
post-linking functions. By appending translusion in linking phase,
post-linking functions will be able to access it.
